Timely maintenance of air conditioners is very important, but problems still arise during the operation of the equipment. Almost every owner sooner or later wonders why water flows from the air conditioner. This may be due to improper installation or blockage of the split system. What should you do in this case? Let’s figure it out.

Water is dripping from the air conditioner: what to do?

First of all, you need to determine the place where moisture forms. The leaks may be on the indoor unit of the equipment or on the blinds. Sometimes condensation forms directly on the body and on the wall. The intensity of condensation varies, so the owner of the equipment does not immediately notice the problem. In this case, you should take into account not only the correct functioning of the air conditioner, but also compliance with the temperature conditions recommended by the manufacturer.

To fix the problem, it is necessary to find out the exact cause of the breakdown, because the algorithm of actions depends on this. Repairing the air conditioner yourself can only aggravate the situation, so you should not dismantle the equipment. If you notice a leak, turn off the device and de-energize it to prevent a short circuit. If you don’t know why water flowed from the air conditioner or condensation formed, it is better to call a specialist.

Water from the air conditioner: causes and solutions to the problem

Most often, a leak occurs due to incorrect operation of the compressor. Dirt clogs the heat exchanger and fan, so the refrigerant does not completely evaporate, but returns back to the air conditioner. The likelihood of water hammer will increase if the owner neglects to regularly clean the system.

The main reasons why water drips from the indoor unit of the air conditioner:

1. Incorrect operation.
2. Drain pipe clogged or connections leaking.
3. Error during hardware installation.
4. Freon leak.
5. Lack of thermal insulation of freon pipes.
6. Incorrect charging of air conditioners.

Water sometimes drips from the air conditioner due to improper installation. Condensation and moisture appear if the hole is not made at the right angle. Unprofessional installation or maintenance of the cooling system is a common occurrence. In this case, only replacing the relevant parts and reinstalling the air conditioner will help.

At home, you can only try to clean the filter. To do this, pull it out after disconnecting the air conditioner from the network. To do this as carefully as possible, you need to lift the front panel and pull the air filters towards you. It is recommended to wash them with warm water – no higher than 45 degrees. If the problem is not a clogged split system, contact the service center.

How to prevent water dripping from an air conditioner: recommendations and tips

The split system requires regular maintenance. If you don’t clean your air conditioner on time, it will start to work worse and may soon fail altogether. To prevent water from dripping from your air conditioner, you need to follow certain rules.

Prevention involves the following actions:

• control of correct functioning;
• washing filters once a month;
• deep cleaning of the air conditioner twice a year;
• flushing the external unit every 2-3 years;
• refill freon once every 2 years or as needed (if a leak is noticed).

Preventative work is especially important before the start of the season. You will need to check the operation of the thermostat and monitor the indicator readings. If the climate control equipment does not provide the required temperature or water is leaking from the indoor unit of the air conditioner, figure out why this is happening. When the device makes strange sounds and the amount of condensation increases, call a technician.

If a malfunction is detected, it is better to postpone operation of the air conditioner. Before the specialist arrives, the equipment must be de-energized.