Each split system has a clear installation diagram, violation of which leads to incorrect operation: excessive noise, refrigerant leaks, condensate leaks, and reduced energy efficiency. As a result, air conditioning repairs or even equipment replacement may be necessary.

How to install an air conditioner: ventilation problems if installed incorrectly

Failure to comply with installation technology often causes problems with the ventilation duct. Usually the cause of problems is kinks in the tubes. If during inspection they are not detected, you should contact a service center technician for diagnostics. Call a specialist when:

• the room is partially cooled (only in the area near the air conditioner);
• the device produces too weak a cold flow;
• air is blown out unevenly and unstably;
• The device only blows from the sides.

In most cases, timely maintenance of air conditioners allows you to get rid of problems associated with improper installation, avoid damage and high costs for repairs or the purchase of a new split system.

How to install an air conditioner to eliminate the risk of an emergency with subsequent repairs

The first stage of correct installation is determining the power of the selected model. If it is not enough for the area of ​​the room, the air will be cooled ineffectively, malfunctions in the operation of the device and excessive energy consumption will appear.

How to properly install an air conditioner in a room (indoor unit):

1. Make sure that the distance to the ceiling is at least 7–10 cm, and to the furniture – 70–100 cm (the device cannot be hung above heating radiators).
2. Draw a separate line with fuses from the electrical panel (preferably).
3. “Recess” the line into the wall (not recommended in load-bearing walls of panel houses and horizontal joints between slabs) or run along the surface.
4. Avoid placing people under direct flow of cooled air.

Fastening elements can be selected in accordance with personal preferences and the design features of the room.

How to properly install an air conditioner (outdoor unit):

1. Choose a flat surface that can withstand about 50–60 kg of load (fastening to an aerated concrete wall is not advisable).
2. Avoid distortions in all planes.
3. Protect the device from street debris with a canopy.
4. Connect the drainage pipe to the sewer system or arrange a drain so that condensation does not drip onto passers-by.
5. Leave a gap of 10 cm between the wall and the block (for effective airflow).
6. Evacuate the connections of the freon line between the external and internal units.

Smart Climate Group specialists, who specialize in the selection and implementation of effective climate systems, are always ready to explain how to install an air conditioner in an apartment, taking into account the architectural features and layout of the premises. This approach will ensure long-term operation of the equipment without malfunctions and the need for repairs.

The impact of improper installation of an air conditioner on its service life and overall performance

Air conditioning systems last from 8 to 20 years, but this period is significantly reduced if installed incorrectly. For example, if there is a refrigerant leak due to a leaky line, the equipment fails in a matter of days. Installation inaccuracies also affect the overall efficiency of work. The device overuses electricity and cools the air in the room for a long time and poorly.

With Smart Climate Group, installation of air conditioners in Kyiv is always reliable and of high quality!